'59 Project September 2005
Exhaust system is completed. I may need to trim some off the end of the outlet pipe and make it a little more flush with the body. I'll decide that after I run it some.
Wiring harness is by E-Z Wiring. The fuse block is pretty small and the flashers can be mounted anywhere under the dash. This is just the beginning of the wiring process so it looks pretty messy.
View of completed instruments. In case you are thinking about making a speedometer lens with black letters, do yourself a favor and order a new one from Trim Parts. You can get one with no paint in the letters. This is so much easier than trying to remove the white paint from an old lens.
Headers are completed.
Radiator and frame are designed to remain in place with the body lifted.