'59 Project December 2005


Click on a photo to view a larger image. 
A new copy of your browser will be launched to view the image.  
Click on the exit button to return to this page.

 

    t_12290501.jpg (4082 bytes)

Several layers of fiberglass are laid on top of the hood scoop mock up to create a female mold.

 

t_12290506.jpg (6037 bytes)

Several pieces of foam board are glued to the fiberglass mold to add stiffness .

 

t_12290505.jpg (5571 bytes)

The inside of the mold.  The actual hood scoop will be laid up inside this mold.

 

t_12290511.jpg (5261 bytes)

Fitting doors, trunk, and hardtop. 

 

next page